MAX-PAK Vertical Balers

WHY WE STAND OUT FROM THE REST
• 10" Channel for Side Walls
• 12" Channel for Mounting Cylinder
• Tube Steel in Discharge Door
• 8 Pieces of 4" Channel in Sub Floor
• Platen Roller Guides
• Spring Doors
• D05 Valve

WARRANTY: Standard Vertical Balers carry a warranty of two-years on parts and labor, and five-years on the structure. See warranty for details

INSTALLATION: Our Driver/Installer secures and preps the baler.

SERVICE:
• We provide a dedicated 800 number.
• We provide service trucks and factory trained technicians.
• We provide over 300 hydraulic service repair centers.
• We provide the end user with total access to replacement parts.

More Vertical Balers:
Supermarket Baler
Stockroom Baler
Vertical Foam Baler

Back to Equipment Page

Baler Model	Bale Size	Bale Wt. Lbs.	Cycle Time No Load	Motor	Pump	Cylinder	System Pressure	Ram Pressure	Platen Pressure	Oil Capacity	Approx. Ship Wt.
MP30	30X24X24	Up to 150	36 sec	1.5hp 110v 1ph	2 Stage	3.25" Bore 2" Rod 30" Stroke	1800 psi	17,318 lbs	28.11 psi	11 Gal	1200 lbs
MP36	36x24x27	Up to 250	30 sec	5hp 208/230/460v 3ph	2 Stage	4" Bore 2.25" Rod 27" Stroke	2500 psi	31,425 lbs	42.01 psi	15 Gal	1580 lbs
MP48HD-10	30x48x48	Up to 900	48 sec	10hp 208/230/460v 3ph	9.8 GPM	6" Bore 3.5" Rod 48" Stroke	2200 psi	62,194 lbs	48.29 psi	30 Gal	4700 lbs
MP48HD-15	30x48x48	Up to 1000	48 sec	15hp 208/230/460v 3ph	9.8 GPM	6" Bore 3.5" Rod 48" Stroke	2600 psi	73,502 lbs	57.07 psi	30 Gal	4700 lbs
MP4820-66-7	30x48x48	Up to 1100	48 sec	20hp 208/230/460v 3ph	12.9 GPM	7" Bore 4.5" Rod 66" Stroke	2600 psi	100,048 lbs	77.68 psi	41 Gal	5300 lbs
MP60LP	30x36x60	Up to 800	25 sec	10hp 208/230/460v 3ph	9.8 GPM	6" Bore 3.5" Rod 30" Stroke	2200 psi	62, 194 lbs	38.30 psi	20 Gal	4100 lbs
MP60HD-10	30x48x60	Up to 1000	48 sec	10hp 208/230/460v 3ph	9.8 GPM	6" Bore 3.5" Rod 48" Stroke	2200 psi	62,194 lbs	38.30 psi	30 Gal	5000 lbs
MP60HD-15	30x48x60	Up to 1100	48 sec	15hp 208/230/460v 3ph	9.8 GPM	6" Bore 3.5" Rod 48" Stroke	2600 psi	73,502 lbs	45.26 psi	30 Gal	5000 lbs
MP6020-66-7	30x48x60	Up to 1200	55 sec	20hp 208/230/460v 3ph	12.9 GPM	7" Bore 4.5" Rod 66" Stroke	2600 psi	100,048 lbs	61.61 psi	41 Gal	5700 lbs
MP6020-66-8	30x48x60	Up to 1300	58 sec	20hp 208/230/460v 3ph	45.2 GPM	8" Bore 5.5" Rod 66" Stroke	2600 psi	130,678 lbs	80.47 psi	100 Gal	6300 lbs
MP7230	30x48x72	Up to 1100	48 sec	15hp 208/230/460v 3ph	9.8 GPM	6" Bore 3.5" Rod 48" Stroke	2600 psi	73,502 lbs	37.50 psi	30 Gal	5400 lbs
MP7240	40x48x72	Up to 1300	48 sec	20hp 208/230/460v 3ph	12.9 GPM	7" Bore 4.5" Rod 48" Stroke	2600 psi	100,048 lbs	37.61 psi	41 Gal	6700 lbs
MP7245	45x48x72	Up to 1400	48 sec	20hp 208/230/460v 3ph	12.9 GPM	7" Bore 4.5" Rod 48" Stroke	2600 psi	100,048 lbs	33.24 psi	41 Gal	6900 lbs

Baler Model	A	B	C	D	E	F	G	H	I
MP30	34.5	45	34	71.25	99.25	36	63	56	43
MP36	40.5	51	34	71.25	99.25	36	70	56	43
MP48HD-10	54	65.75	54	107	143	45	89	76	54
MP48HD-15	54	65.75	54	107	143	45	89	76	54
MP4820-66-7	54	65.75	54	107	164	45	89	76	54
MP60LP	66.25	78	41	81	103.5	45	101	61	54
MP60HD-10	66.25	78	54	107	143	45	101	76	54
MP60HD-15	66.25	78	54	107	143	45	101	76	54
MP6020-66-7	66.25	78	54	107	164	55	101	76	54
MP6020-66-8	66.25	78	54	107	164	55	101	76	54
MP7230	77.5	89.25	54	107	143	45	113	76	54
MP7240	77.5	89.25	54	107	143	55	123	76	54
MP7245	77.5	89.25	54	107	143	60	128	76	69

• In order to provide the most currently engineered and designed equipment, we reserve the right to change specifications
without notice.
• Performance may vary application.
• Products must be installed and operated according to required standards, codes, regulations and safety procedures.
• All MAX-PAK Equipment is provided with A-36 structural steel frames. A-514 reinforced in areas of high stress. Strong
rigid container walls provide performance and long service life. A-1018 is used for gib bar, guide and control surfaces.
• All MAX-PAK Equipment meets or exceeds all ANSI Z245.5 and OSHA standards.
• All MAX-PAK Equipment has NEMA 12 and UL approved electrical panel and control assembly.
• MAX-PAK offers several lines of equipment for your recycling needs: Vertical Balers, Horizontal Closed End Balers,
Horizontal Open End Balers, Full-Eject Balers, Compactors, Containers, Conveyors and Trailers.