| Home | Request Information | About MAX-PAK | Equipment | Contacts |
Vertical Foam Baler WARRANTY: The Vertical Foam baler carries a warranty of one year on Parts and Labor. Certain conditions apply.

INSTALLATION: Our Driver/Installer secures and preps the baler.

SERVICE:
• We provide a dedicated 800 number.
• We provide service trucks and factory trained technicians.
• We provide over 300 hydraulic service repair centers.
• We provide the end user with total access to replacement parts.

View More Vertical Balers:
 Supermarket Baler
Stockroom Baler
 Vertical Foam Baler

Back to Equipment Page

SPECIFICATIONS

Baler Model Bale Size Bale Wt. Lbs. Cycle Time
No Load		 Motor Pump Cylinder System
Pressure		 Ram
Pressure		 Platen
Pressure		 Oil
Capacity		 Approx.
Ship Wt.
MP48F
(Foam)		 30X48x48 Up to 600 52 sec 15hp
208/230/460v
3ph		 9.8 GPM 6" Bore
3.5" Rod
52" Stroke		 2600 psi 73,502 lbs 57.07 psi 23 Gal 4700 lbs
MP48F
(Fiber)		 30X48x48 Up to 900 52 sec 15hp
208/230/460v
3ph		 9.8 GPM 6" Bore
3.5" Rod
52" Stroke		 2600 psi 73,502 lbs 57.07 psi 23 Gal 4700 lbs
MP60F
(Foam)		 30x48x60 Up to 750 52 sec 15hp
208/230/460v
3ph		 9.8 GPM 6" Bore
3.5" Rod
52" Stroke		 2600 psi 73,502 lbs 45.26 psi 23 Gal 5100 lbs
MP60F
(Fiber)		 30x48x60 500-1300 65 sec 15hp
208/230/460v
3ph		 9.8 GPM 6" Bore
3.5" Rod
52" Stroke		 2600 psi 73,502 lbs 45.26 psi 23 Gal 5100 lbs

 

MEASUREMENTS (Inches)

Baler Model A B C D E F G H I
MP48F
(Foam)		 54 65.75 54 107 143 45 89 76 54
MP48F
(Fiber)		 54 65.75 54 107 143 45 89 76 54
MP60F
(Foam)		 66.25 78 54 107 143 45 101 76 54
MP60F
(Fiber)		 66.25 78 54 107 143 45 101 76 54

• In order to provide the most currently engineered and designed equipment, we reserve the right to change specifications
  without notice.
• Performance may vary application.
• Products must be installed and operated according to required standards, codes, regulations and safety procedures.
• All MAX-PAK Equipment is provided with A-36 structural steel frames. A-514 reinforced in areas of high stress. Strong
  rigid container walls provide performance and long service life. A-1018 is used for gib bar, guide and control surfaces.
• All MAX-PAK Equipment meets or exceeds all ANSI Z245.5 and OSHA standards.
• All MAX-PAK Equipment has NEMA 12 and UL approved electrical panel and control assembly.
• MAX-PAK offers several lines of equipment for your recycling needs: Vertical Balers, Horizontal Closed End Balers,
  Horizontal Open End Balers, Full-Eject Balers, Compactors, Containers, Conveyors and Trailers.

More Vertical Balers:  Supermarket Baler  Stockroom Baler  Vertical Foam Baler  Back to Equipment Page

| Home | Request Information | About MAX-PAK | Equipment | Contacts |

© 2001 MAX-PAK Waste Processing Equipment, Inc. All rights reserved.