| Home | Request Information | About MAX-PAK | Equipment | Contacts |

Trailer Drop Deck Trailer

When you need a forklift for loading and unloading, Fontaine's Patented Heavy Duty trailer with lift truck compartment hauls the lift truck safely. The lift truck can be easily loaded or unloaded by one man in minutes.

Back to Equipment Page

DESCRIPTION
• The lift truck compartment is up front where its weight is on the pulling axle. The truck gets a better ride and is protected
   from road dirt and other abuse.
• Load and unload the lift truck quickly and easily with an electrically powered ramp.
• Road tested for over five years.
• It's safer, easier to load, and hauls more payload legally with the lift truck up front.

SPECIFICATIONS
• AXLES: (2) 5" , 20,000 capacity each
• BRAKES: (4) 16½" x 7" air actuated
• WHEELS: (4) 20" disc with oil seal hubs
• RIMS: (8) 8.25 x 22.5
• TIRES: (8) radial 255/7OR 22.5
• SUSPENSION: H 7700 3 leaf springs
• LANDING GEAR: Roadisde handle two speed with sand shoes
• BUMPER: DOT
• FRAME: High tensile steel
• FLAPS: (2) 24" anti-sail
• KING PIN: 2" S.A.E. heat treated
• PAINT: One color, synthetic enamel
• LIGHTS & REFLECTORS: I.C.C. regulation 12 volt, 7-way connector
• FLOOR: Apitong or treated pine, steel plate over tires
• RUB RAIL: With pipe spacers 12" O.C.
• RAMP: Folding on curbside, 48"W x 102"L; 64"W x 102"L optional
• LASHING RINGS: (2) ties for lift truck

OPTIONAL EQUIPMENT
• BULK HEAD: 48" high, 3" channel
• TOOL BOX: 15"W x 96"L with 48" ramp only

Specifications subject to change without notice.

MEASUREMENTS (Inches)

Back to Equipment Page

| Home | Request Information | About MAX-PAK | Equipment | Contacts |

© 2001 MAX-PAK Waste Processing Equipment, Inc. All rights reserved.