MAX-PAK Horizontal Closed End Balers

More Horizontal Closed End Balers:
Viper Baler Horizontal Foam Baler Back to Equipment Page

WARRANTY: The Horizontal balers carry a warranty of one year on Parts and Labor. Certain conditions may apply.

INSTALLATION: Our Driver/Installer secures and preps the baler.

SERVICE:
• We provide a dedicated 800 number.
• We provide service trucks and
• factory trained technicians.
• We provide over 300 hydraulic
• service repair centers.
• We provide the end user with total
access to replacement parts.

Baler Model (Feed Opening)	Bale Size	Bale Wt. Lbs.	Cycle Time No Load	Motor	Pump	Cylinder	System Pressure	Ram Pressure	Platen Pressure	Oil Capacity	Approx. Ship Wt.
HCE 3060 F (30x72)	30X36x60	Up to 1300	19.99 sec	30hp 230/460v 3ph	52.5 GPM	7" Bore 5" Rod 105" Stroke	2600 psi	100,060 lbs	105 psi	150 Gal	16,000 lbs
HCE 3660 F (36x72)	36X36x60	Up to 1450	19.99 sec	30hp 230/460v 3ph	52.5 GPM	7" Bore 5" Rod 105" Stroke	2600 psi	100,060 lbs	86.56 psi	150 Gal	17,000 lbs
HCE 4860 F (48x72)	48X36x60	Up to 1500	26 sec	30hp 230/460v 3ph	52.5 GPM	8" Bore 5.5" Rod 105" Stroke	2600 psi	130,690 lbs	83.56 psi	150 Gal	25,000 lbs

Baler Model	A	B	C	D	E	F	G	OAL with Door Open	H	I	J
HCE 3060x72F	36.5	47.75	44.5	63.5	73	285.5	294	335	95.5	81	164
HCE 3660x72F	42.5	53.75	44.5	63.5	73	285.5	294	341	95.5	81	164
HCE 4860x72F	61.5	72.75	44.5	63.5	73	285.5	294	353	95.5	81	164

• In order to provide the most currently engineered and designed equipment, we reserve the right to change specifications
without notice.
• Performance may vary application.
• Products must be installed and operated according to required standards, codes, regulations and safety procedures.
• All MAX-PAK Equipment is provided with A-36 structural steel frames. A-514 reinforced in areas of high stress. Strong
rigid container walls provide performance and long service life. A-1018 is used for gib bar, guide and control surfaces.
• All MAX-PAK Equipment meets or exceeds all ANSI Z245.5 and OSHA standards.
• All MAX-PAK Equipment has NEMA 12 and UL approved electrical panel and control assembly.
• MAX-PAK offers several lines of equipment for your recycling needs: Vertical Balers, Horizontal Closed End Balers,
Horizontal Open End Balers, Full-Eject Balers, Compactors, Containers, Conveyors and Trailers.